Home  ›  mSATA 1.8-Inch  ›  VisionTek  ›  VisionTek mSATA

VisionTek mSATA

VisionTek mSATA solid state drives are available in capacities of 60 GB, 120 GB, 240 GB and 480 GB and have maximum sequential speeds of 540 MB/s and 425 MB/s for random read and write respectively. Its low 4k random aligned write access stands at 60,000 IOPS. It is one of the SSD’s that utilizes SF-2281 controller.

As a “SandForce-driven” solid state drive, the VisionTek mSATA has many features unique to such group. It supports RAISE, SMART and TRIM, depending on the operating system used. Besides the SF-2281 controller inside, the VisionTek mSATA uses asynchronous NAND flash modules. Other features include ECC and redundant storage data protection and an MTBF of 1,500,000 hours. 


  • Sequential Read: Up to 540 MB/second
  • Sequential Write: Up to 425 MB/second
  • NAND type: MLC
  • Interface: SATA 3 6GBps
  • Controller: SandForce SF-2281
  • Form Factor: 1.8 inches
  • DRAM Cache: N/A
  • Power Consumption (Active): N/A
  • Power Consumption (Idle): N/A
  • TRIM support: Yes
  • SMART support: Yes
  • Warranty: 3 years

Part Numbers:

  • 60GB: 900610
  • 120GB: 900611
  • 240GB: 900612
  • 480GB: 900613



The VisionTek 480GB mSATA SATA 3 SSD has excellent performance typical of LSI SandForce Driven SSDs, as well as a high capacity that is still not common in mSATA SSDs.

Comments are closed.

Help us improve the wiki Send Your Comments