Home  ›  2.5-Inch SSDs (MLC)  ›  OWC  ›  Mercury Enterprise Pro 6G

Mercury Enterprise Pro 6G

The SandForce SF-2582 powered Mercury Enterprise Pro is available at four capacities namely 50 GB, 100 GB, 200 GB and 400 GB. The drive can reach a maximum sequential read speed of 550 MB/s and sequential write speed of 520 MB/s. It boasts an IOPS of 60,000 for both random 4k read and write. With these figures, the Mercury Enterprise Pro is best suited for critical deployments.

Each variant contains 28% over-provisioning space that is used for real-time redundancy and error correction. The Mercury Enterprise Pro can be used as a single drive or RAID configurations on all levels. SMART and OS-dependent TRIM commands are also supported. Together with the controller are enterprise-grade toggle synchronous NAND flash modules based on eMLC. The drive comes with a seven-year limited warranty.


  • Sequential Read: Up to 550 MB/second
  • Sequential Write: Up to 520 MB/second
  • NAND type: MLC
  • Interface: SATA 3 6GBps
  • Controller: SandForce SF-2582
  • Form Factor: 2.5 inches
  • Power Consumption (idle): <1.2 W
  • Power Consumption (active): < 3 W
  • DRAM Cache: None
  • TRIM support: Yes
  • SMART support: Yes
  • Warranty: 7 years

Part Numbers:

  • 50 GB : OWCSSDMEP6G50
  • 100 GB : OWCSSDMEP6G100
  • 200 GB : OWCSSDMEP6G200
  • 400 GB : OWCSSDMEP6G400



Comments are closed.

Help us improve the wiki Send Your Comments